Gas Ball Valves (Nitrogen N2, CNG, Oxygen O2, oil/Gas)

Flutec Gas ball valves offer utmost tightness under all conditions. They are designed to undergo maximum switching cycles in their life cycle. The raw material selection depends on the application conditions. We offer SS316 for gas applications with special ball seat material.

• Pressure Rating: up to 2000 bar (Standard 500 bar)
• Temperature Rating: -40C to +200C 
• Size Range: 1/8” to 3”
• Ball Type: Floating, Trunnion
• Sealing: Special stem sealing for higher switching cycles
• Leakage: Bubble tight, 100% Leakfree. Other certifications also possible like ANSI Class VI, etc. available.
• Material of Construction: SS 316, Super Duplex, Hastelloy/Inconel, as per NACE MR0175 / ISO 15156.
• O-ring: NBR/Viton and other on request
• End Connection: BSP, NPT male/Female, Ermeto Connection, Cone and Thread, ANSI Flange, DIN Flange, ISO 6162-1/2 SAE Flange, ISO 6164-1/2 Flange
• Application: Gas transportation, Filteration, Lifting Platforms Offshore, Oil/Gas exploration, Block and bleed function, Pressure tank valves, Testbench, etc.

The raw material selection depends on the application conditions. We offer SS316 for gas applications with special ball seat material.

Flutec F + P charging and testing block is used to charge and test back-up type hydraulic accumulators. It has connections for the FPU-1 charging and testing unit and for pressure gauges. In addition, it allows the back-up nitrogen bottles to be shut off from the hydraulic accumulator.  As a safety function, a GSV6 gas safety valve can be fitted externally.

F+P Block provide a mandatory connection between accumulator and back-up nitrogen bottles. F+P16 or F+P32 can be selected as needed.