FLUTEC - Manufacturer of Ball Valves, Flow Control Valves & Needle Valves
We believe in business ethics above all.
Flutec Valves Overview
High Pressure Ball Valve (KHB/KHM)
High Pressure Ball Valve (KHB/KHM)
High Pressure Ball Valve (KHB/KHM)
KHB / KHM - High Pressure Ball Valves are available from sizes 1/8" to 6" and upto 1000 bar pressure. Available in all materials and end connections
Flow Control Valve (DV/DRV)
High Pressure Ball Valve (KHB/KHM)
High Pressure Ball Valve (KHB/KHM)
DV - Flow Control Valve
DRV - Flow Control Valve with Check valve, offer regulation of flow and pressure in order to facilitate accurate functioning of the hydraulic system
Needle Valve (NV/SOV)
High Pressure Ball Valve (KHB/KHM)
NV - Needle Valve offer bubble tight shutoff along with flow and pressure regulation. They are also known as Shut off valves (SOV)
Non Return / Check Valve (NRV/RV)
Manifold Mounting Ball Valve (KHP)
NRV / RV - Non return valve or check valve allow the flow of medium only in one direction, thus avoiding backflow to prevent system failures
Manifold Mounting Ball Valve (KHP)
Manifold Mounting Ball Valve (KHP)
Manifold Mounting Ball Valve (KHP)
KHP - Manifold Mounted Ball Valves facilitate compact and easy mounting of valves on to Manifold block, avoiding end connections, thus minimizing leak points.
Hydrogen H2 Ball Valve (KHBH2)
Manifold Mounting Ball Valve (KHP)
Manifold Mounting Ball Valve (KHP)
KHBH2 - Hydrogen H2 Ball valve are made for extremely thin gas Hydrogen H2 which is combustible as it comes in contact with air (leakage). The risk involved with Hydrogen H2 is so high, so customers trust Flutec.
Flanged Ball Valve (KHBF/KHMF/KHFF)
Flanged Ball Valve (KHBF/KHMF/KHFF)
KHBF / KHMF / KHFF - Flanged Ball Valve available in all Flange types like SAE3000/SAE6000 as per ISO 6162, ANSI type, DIN Type, ASME Type
Stainless Steel / Gas Ball Valve
Flanged Ball Valve (KHBF/KHMF/KHFF)
Gas Ball valve have special chevron packed spindle sealing and customized ball seat sealing to give bubbletight shutoff even at high switching cycles and frequencies, higher MTTF
Valve internal parts / Accessories
Flutec provides valve internal parts like valve stem spindle, valve adapters, valve ball, ball valve handle, customized ball valve handles
3/4 Way Valve (KHB3K/KH3/KH4)
KHB3K / KH3 / KH4 - 3 Way and 4 Way Ball Valve often act as diverter valves and optimize system pipeline by avoiding use of many 2 Way valves
Lockable Ball Valve (SO760/SO770)
Motorized Ball Valve (AP/AP.E/AP.D/AE)
SO760 / SO770 - Lockable Ball Valves are a special Flutec design, ball valve can be locked in open 0° and closed 90° position
Motorized Ball Valve (AP/AP.E/AP.D/AE)
Motorized Ball Valve (AP/AP.E/AP.D/AE)
AP / AP.E / AP.D / AE Series - Flutec Ball Valves with pre fitted actuator for automation, using pneumatic actuator, electric actuator or hydraulic actuator
Butterfly Valve
High Pressure Gate Valve
High Pressure Gate Valve
Butterfly Valve is low pressure valve used to regulate or isolate flow. Consists of a disc that rotates around a central axis to allow or block flow. Available from sizes 1" to 40". Materials: WCB / SS304 CF8 / SS316 CF8M
High Pressure Gate Valve
High Pressure Gate Valve
High Pressure Gate Valve
Flutec Gate Valve is a high pressure valve, which uses linear motion primarily for on/off flow control. It has a gate (wedge or parallel) that moves up and down to permit or stop flow. Available from sizes 1" to 16". Materials: WCB / SS304 CF8 / SS316 CF8M
Steam Globe Valve
High Pressure Gate Valve
Steam Globe Valve
Flutec high pressure Globe valve is used for throttling and regulating fluid flow. It has a movable disk and a stationary ring seat inside a spherical body Available from sizes 1" to 12". Materials: WCB / SS304 CF8 / SS316 CF8M
Lockable Ball Valve (SO760/SO770)
Ball Valves with Locking Device
SO760 / SO770 - Lockable Ball Valves are a special Flutec design in which ball valves can be locked in open 0° & closed 90° position.
This avoids any accidental switching of ball valves, which may lead to potential failures and heavy monetary losses. Moreover, the security of entire system is raised, making it fail proof.
Motorized-Pneumatic/Electric/Hydraulic Ball Valve Automation
Motorized Ball Valve
Motorized valves are valves equipped with an actuator that enables automated operation to control the flow of fluids (liquids, gases, or slurries) in a system. The actuator can be electric, pneumatic, or hydraulic, allowing the valve to open and close in a quarter turn.
These valves help in integration with control systems like PLCs, SCADA, allowing remote operation and centralized management.
Accumulator Safety Block and Accessories
Accumulator Safety and Shutoff Block - SAF/DSV
Flutec Accumulator Safety and Shut-off block SAF, is an important hydraulic accessory, which protects the fluid side from excess pressure while also facilitating the shut-off and relief of hydraulic accumulators.
Sizes available SAF8, SAF10, SAF20, SAF32.
Nitrogen N2 Charging and Testing Block - F+P
Flutec F+P Block provides a mandatory connection between accumulator and back-up nitrogen bottles.
F+P16 or F+P32 can be selected as needed.
Flutec Ball Valve Industry Applications
Ball Valves for Steel mills / Furnace industry
Flutec SAE Flange Type Ball Valve with Locking arrangement and Proximity switch is used in the Steel mills and furnaces. There is also a provision of bypass to the tank. The sizes range from 1/2" to 2". The Lockable Ball valves are available with a special design bracket which makes provision for assembling the limit switch or proxmity switch also.
Ball Valves for Nitrogen N2, Hydrogen H2, etc.
Flutec Ball valves / Needle Valves are used in Nitrogen N2 / Hydrogen H2 generation, Storage, transportation, boosters for test benches.
Compressed Air after a certian pressure is dangeorus due to the presence of combustibe Oxygen. So, most of the industries use compressed nitrogen.
Hydrogen H2 being the thinnest, lightest medium would be used in future a s source of energy and this would in return propel the thriving of an entire ecosystem and infrastructure which would need ample of high pressure fittings, ball valves, needle valves and non return valves.
Ball Valves for Agriculture
For reference John Deere 6200 Series, the combination of two ball valves with various end ports are used to change the function of cylinder from double acting to single acting and vice versa. With this simplified Version, the vehicle occupies less space/weight and attains utmost safety with lesser leakage points.
Ball Valves for Compressed Natural Gas (CNG)
Flutec 2 Way and 3 Way Ball valves are used in CNG refuelling stations.
Flutec valves guarrantee high cycle and durability facilitating refuelling of thousands of vehicles per day. This valve can sustain high frequency switching cycles, and as high MTTF.
Ball Valves for Renewable Energy - Windmills
Flutec Manifold mounted Ball valves are used in power generation unit of the windmills. As the ball valves have full bore they offer maximum flow rate and light weight solution at the same time, with no pressure drop.